Anatomical High Projection Silicone Gel Implant

Optimam® Sublime Line® Microthane® HP/M High Projection Silicone Gel

Oblong oval base. Anatomical profile. High projection. Filled with two gels. Microthane (micro-polyurethane-coated) shell.

The silicone-gel-filled Optimam® Sublime Line® implants with Microthane® surface have an oblong oval base and an anatomical projection with the highest point in the lower third. The filling level of the Sublime Line® implants is maximized to provide more volume.

The consistency of these high-quality breast implants is very close to the haptics and motional properties of the breasts. These implants are available in low profile, moderate profile, high profile, and extra high profile.

The special curve measurement, which describes the distance between the highest point of projection and the caudal implant edge, establishes a reference parameter for correct placement of the areola in relation to the inframammary fold.

POLYTECH Health & Aesthetics implants are filled with the highly cross-linked EasyFit™ gel, which stands out due to its natural consistency. Because of the gel’s “memory effect”, it always returns to its original shape after moderate mechanical deformation.

The chemically and mechanically resistant, elastic shell of the implants consists of several layers of a silicone elastomer. IN order to maintain a high level of safety, the shell of the silicone gel-filled breast implants are equipped with an additional diffusion barrier layer.

The surface of the implant shell is Microthane®-covered (micropolyurethane foam). This surface is known for its reliability and has been proven to contribute to a reduction of capsular contracture rates.

Catalog # Volume Diameter Proj Height Curvature
30776-155 155cc 8.8cm 4.1cm 10.2cm 5.6cm
30776-180 180cc 9.3cm 4.2cm 10.7cm 5.8cm
30776-215 215cc 9.8cm 4.4cm 11.3cm 6.1cm
30776-250 250cc 10.3cm 4.6cm 11.9cm 6.4cm
30776-280 280cc 10.8cm 4.7cm 12.5cm 6.6cm
30776-320 320cc 11.3cm 4.9cm 13.1cm 6.9cm
30776-365 365cc 11.8cm 5.1cm 13.6cm 7.2cm
30776-415 415cc 12.3cm 5.3cm 14.2cm 7.4cm
30776-460 460cc 12.8cm 5.5cm 14.8cm 7.7cm
30776-515 515cc 13.3cm 5.7cm 15.4cm 8.0cm
30776-570 570cc 13.8cm 5.9cm 16.0cm 8.2cm
30776-640 640cc 14.3cm 6.1cm 16.5cm 8.5cm
30776-705 705cc 14.8cm 6.3cm 17.1cm 8.8cm
30776-775 775cc 15.3cm 6.4cm 17.7cm 9.0cm
30776-855 855cc 15.8cm 6.6cm 18.3cm 9.3cm

PLEASE NOTE: Individual implant dimensions may vary slightly in products of this type. Not all units conform exactly to the dimensions noted.