Round High Projection Silicone Gel Implant

Replicon® Sublime Line® Microthane® HP/M High Projection Silicone Gel

Round base. Anatomical profile. High projection. Filled with two gels. Microthane (micro-polyurethane-coated) shell.

The silicone-gel-filled Replicon® Sublime Line® implants with Microthane® surface have a round base and an anatomical projection with the highest point in the lower half. The filling level of the Sublime Line® implants is maximized to provide more volume.

The consistency of these high-quality breast implants is very close to the haptics and motional properties of the breasts. These implants are available in low profile, moderate profile, high profile, and extra high profile.

The special curve measurement, which describes the distance between the highest point of projection and the caudal implant edge, establishes a reference parameter for correct placement of the areola in relation to the inframammary fold.

POLYTECH Health & Aesthetics implants are filled with the highly cross-linked EasyFit™ gel, which stands out due to its natural consistency. Because of the gel’s “memory effect”, it always returns to its original shape after moderate mechanical deformation.

The chemically and mechanically resistant, elastic shell of the implants consists of several layers of a silicone elastomer. IN order to maintain a high level of safety, the shell of the silicone gel-filled breast implants are equipped with an additional diffusion barrier layer.

The surface of the implant shell is Microthane®-covered (micropolyurethane foam). This surface is known for its reliability and has been proven to contribute to a reduction of capsular contracture rates.

Catalog # Volume Diameter Height Proj Curvature
30736-075 75cc 7.3cm 7.3cm 3.6cm 4.6cm
30736-095 95cc 7.8cm 7.8cm 3.8cm 4.8cm
30736-115 115cc 8.3cm 8.3cm 3.9cm 5.1cm
30736-130 130cc 8.8cm 8.8cm 4.1cm 5.3cm
30736-160 160cc 9.3cm 9.3cm 4.2cm 5.6cm
30736-180 180cc 9.8cm 9.8cm 4.4cm 5.8cm
30736-210 210cc 10.3cm 10.3cm 4.6cm 6.1cm
30736-240 240cc 10.8cm 10.8cm 4.7cm 6.3cm
30736-275 275cc 11.3cm 11.3cm 4.9cm 6.6cm
30736-315 315cc 11.8cm 11.8cm 5.1cm 6.8cm
30736-350 350cc 12.3cm 12.3cm 5.3cm 7.1cm
30736-395 395cc 12.8cm 12.8cm 5.5cm 7.3cm
30736-445 445cc 13.3cm 13.3cm 5.7cm 7.6cm
30736-495 495cc 13.8cm 13.8cm 5.9cm 7.8cm
30736-550 550cc 14.3cm 14.3cm 6.1cm 8.1cm

PLEASE NOTE: Individual implant dimensions may vary slightly in products of this type. Not all units conform exactly to the dimensions noted.